Kreiger Anti-corrosion Wax Tape
Product introduction
1. Product characteristics:
1. Chemically stable, easy to store, long shelf life, and the product is not prone to deterioration and damage;
2. Good plasticity, can be applied to various irregular planes and changing angles;
3. Simple construction, cold construction, low requirements for metal surface treatment (roughness, cleanliness), and can be directly constructed on wet surfaces or in water;
4. Excellent weather resistance, anti-ultraviolet, and moisture-resistant;
5. Chemically stable, non-flammable, hardly reacts with other substances, and the service life can reach more than 10 years;
6. Can resist the pollution of corrosive media such as low-concentration acids, alkalis, and salts
7. Has a certain thickness (2.0mm), and the anti-corrosion performance is comparable to that of traditional anti-corrosion products that require multiple coatings.
2. Basic product performance parameters:
3. Applicable areas:
4. Product specifications
5. Construction steps
6. Product performance testing
Cutting corrosion spread + weather-resistant aging salt spray test
Purpose: Evaluate the weather resistance and corrosion resistance of the product according to the various test conditions established in ISO 20340, NORSOK M-501, and AWWA C217.
Method: 1. Mark the test piece according to ISO 20340 (the cut line is 2mm wide and 50mm long). Mark the line mechanically (using a drill press with a cobalt carbide drill) or manually.
Mark the line parallel to the short side of the test piece and cut to the steel surface of the test piece.
2. Conduct the test according to ISO 20340, 168 hours per single cycle, for a total of 25 cycles.
Qualified standard: After 25 cycles (4200 hours), there is no blistering, powdering, discoloration, swelling, loss of adhesion, or detachment on the surface,
and the average value of cutting corrosion spread is within 8mm.
Test result: Qualified (attached with SGS test report)
7. Application cases
